Real-Time Digital Twin

Your Asset in a Virtual World

Whether it's a vessel, a train, a truck fleet, or a building — NCoDE SeaTwin creates a live 3D digital twin from your existing sensor data. Edge-deployed, real-time, no cloud required.

Connect your sensors. See your asset rendered in WebGL with live data overlays. Spot anomalies before they become failures. NCoDE SeaTwin turns raw telemetry into a visual, interactive model that operators and engineers can understand instantly — without uploading anything to the cloud.

See NCoDE SeaTwin → See Industries

Cross-Industry Platform

Industries

NCoDE SeaTwin was born in the maritime sector, but the underlying technology — real-time 3D visualisation of live sensor data — applies wherever physical assets need monitoring. The same platform adapts to vessels, vehicles, buildings, and industrial plant.

Maritime

A 3D model of your vessel with live data flowing into every compartment. Navigate between bridge, engine room, and tank spaces in a virtual environment that mirrors reality.

Bridge instruments: heading, speed, depth, wind
Engine room: RPM, temperatures, pressures, load
Tank levels: fuel, water, waste, hydraulic
Alarm and sensor state rendered onto the model
Alarm states colour-coded on the model

Rail

Monitor rolling stock in real time. See traction motor temperatures, brake wear indicators, HVAC status, and door systems across an entire train set — all rendered on a 3D model of the consist.

Traction motor temperature and current draw
Brake pad wear and air pressure
HVAC status per carriage
Door open/close state and obstruction alerts
Track-side infrastructure integration

Trucking & Fleet

Fleet-wide vehicle status at a glance. Engine health, tyre pressures, cargo temperature, and driver behaviour data — all visualised per vehicle with trend analysis and predictive maintenance alerts.

Engine diagnostics via J1939
Tyre pressure and temperature monitoring
Refrigerated cargo temperature tracking
Fuel consumption and idle time analysis
Geofencing and route adherence

Buildings & Facilities

Integrate with your BMS to create a live digital twin of your building. Visualise HVAC zones, power distribution, lighting, access control, and occupancy in a navigable 3D floor plan.

HVAC zone temperatures and setpoints
Power distribution and sub-metering
Lighting control and occupancy sensors
Access control and security system status
Fire alarm zones and sprinkler status

Industrial & Manufacturing

Plant monitoring, pipeline SCADA integration, and manufacturing floor visibility. NCoDE SeaTwin connects to PLC and SCADA systems via Modbus TCP and RTU to render a real-time view of your operation.

Pipeline pressure, flow rate, and valve state
Compressor and pump operating parameters
Manufacturing line throughput and downtime
Environmental sensors (emissions, noise, vibration)
PLC and SCADA integration via Modbus TCP and RTU

Three Steps to a Live Twin

How It Works

NCoDE SeaTwin does not require months of consulting or a cloud subscription to get started. The process is straightforward: connect your sensors, load your 3D model, and start seeing live data in context.

Connect

Plug into your existing sensor infrastructure. NCoDE SeaTwin reads data from the protocols your equipment already speaks — no custom adapters, no proprietary gateways.

NMEA 2000 and NMEA 0183 (maritime)
J1939 / CANbus (engines, vehicles)
Modbus TCP and RTU (industrial, BMS)
RS485 (vibration and stress sensors)
Z-Wave (cabin and environmental sensors) — licensed option
MQTT, HTTP REST, and CSV import
RTSP / ONVIF (camera feeds)

Visualise

Your 3D model loads in a WebGL browser view with live sensor data overlaid in real time. Navigate the model, click on components, and see gauges, charts, and status indicators tied to real data.

WebGL rendering — runs in any modern browser
Colour-coded alarm states on 3D components
Click any component to see live gauges and history
Supports glTF, OBJ, and FBX model formats
Configurable camera presets for common views
Multi-layer views: structure, systems, data

Act

Turn visibility into action. Set threshold alerts, analyse trends over time, and use the data to schedule maintenance before equipment fails — not after.

Configurable threshold alerts per data point
Trend analysis with historical data charts
Predictive maintenance based on degradation curves
Export data to CSV, JSON, or external systems
Automated reports (daily, weekly, monthly)
Integration with CMMS and ERP systems

No Cloud Required

Why Edge-Deployed?

Most digital twin platforms — Azure Digital Twins, AWS IoT TwinMaker, and similar — require you to stream your sensor data to a cloud data centre. NCoDE SeaTwin can run on the edge, right where your assets are, and the comparison below is drawn against that deployment. Here is why that matters.

Running at the edge is an option, not a constraint. The viewer can equally be run from the cloud so shore teams and owners reach the same twin without being on site — same model, same data, same interface. What follows is what you gain by choosing to keep it local.

Works Offline

A vessel at sea, a train in a tunnel, a factory in a remote location — connectivity is never guaranteed. NCoDE SeaTwin processes and visualises data locally. If the internet drops, your digital twin keeps running. No satellite bandwidth required for core functionality. Data syncs upstream when connectivity returns.

Real-Time, No Latency

Cloud-based twins introduce round-trip latency: sensor to cloud, processing, and back again. NCoDE SeaTwin processes data on the vessel itself, so the path from sensor to screen stays on board. When an engine temperature spikes, you see it locally rather than waiting on a round trip to a data centre and back.

No Bandwidth Costs

Streaming thousands of data points per second to the cloud costs real money in bandwidth, especially over satellite or cellular connections. NCoDE SeaTwin keeps the raw data local and only transmits summaries, alerts, or specific data you choose to export. On a vessel with a lot of instrumentation, that difference in upload is substantial.

Data Stays On-Premises

Your operational data never leaves your network unless you decide otherwise. No third-party cloud provider stores your engine parameters, position data, or operational patterns. For industries subject to data sovereignty regulations — maritime, defence, critical infrastructure — this is not a nice-to-have. It is a requirement.

Capability	Cloud Digital Twin	NCoDE SeaTwin (Edge)
Offline operation	No — requires internet	Yes — fully functional offline
Data latency	Round trip to a data centre and back	Processed on board, no round trip
Bandwidth cost	High — all data uploaded	Minimal — only summaries exported
Data sovereignty	Data in third-party cloud	Data stays on your hardware
Setup complexity	Cloud infra, IAM, networking	Single device, browser-based UI
Monthly subscription	Per-device cloud fees	No recurring cloud costs

100+

Data Points

Protocols

WebGL

Real-Time 3D

Edge

Deployed

See NCoDE SeaTwin

NCoDE SeaTwin turns your physical assets into interactive, real-time 3D models. Whether you operate a fleet of vessels, a network of buildings, or an industrial plant, SeaTwin gives your operations team a visual interface that raw data dashboards cannot match. Explore the full product or request a demonstration with your own asset data.

See NCoDE SeaTwin → Request a Demo