Yacht & Superyacht Monitoring

Your Yacht. One App.
Every System.

Monitor every engine, every tank, every camera on your yacht from a single app. NCoDE Mobile works with all marine engines — Caterpillar, MAN, MTU, Volvo Penta, Cummins, Yanmar, and more. No proprietary hardware lock-in.

Whether you own a 24-metre motor yacht or a 90-metre superyacht, NCoDE Mobile gives you real-time visibility into propulsion, power, navigation, fluid levels, and onboard cameras. From the bridge, the marina, or the other side of the world.

See NCoDE Mobile → What You Can Monitor

Complete Vessel Visibility

What You Can Monitor

NCoDE Mobile reads data from your yacht's onboard sensors and presents it in real-time gauges, charts, and alerts. Here is what you see at a glance — all from your phone or tablet.

Engines & Propulsion

Live data from every engine on board, regardless of manufacturer. Twin diesels, triple outboards, or hybrid-electric — it all shows up.

RPM, boost pressure, exhaust gas temperature
Oil pressure, oil temperature, coolant temperature
Fuel rate (litres/hour) and total fuel consumed
Engine hours, load percentage, and trim position
Transmission gear, oil pressure, and status

Navigation & Position

GPS, heading, depth, wind — the essential instruments your captain watches, available anywhere you have a phone signal.

GPS position (latitude, longitude) with chart overlay
Speed over ground (SOG) and course over ground (COG)
Heading (magnetic and true), rate of turn
Depth below transducer with shallow-water alerts
Anchor watch with drag detection and alarm

Power & Batteries

Track every power source on board — from house banks and starter batteries to generators and shore power connections.

Battery voltage, current, state of charge (SOC)
Generator status, output voltage, frequency, load
Shore power connection status and voltage
Solar and wind charger output (where fitted)
DC bus voltage and inverter load

Tanks & Fluids

Know exactly how much fuel, water, and waste capacity you have before casting off. Level data updates continuously.

Fuel tank levels (port, starboard, day tank)
Fresh water tank levels
Grey water and black water holding tank levels
Hydraulic fluid level and pressure
Low-level alerts with configurable thresholds

Live CCTV

View your onboard cameras in real time. Check the engine room, deck, dock lines, or tender garage without walking to the bridge.

Live video feed from IP cameras (RTSP/ONVIF)
Multiple camera grid view
Pan, tilt, zoom control on PTZ cameras
Remote viewing over cellular or satellite
Motion detection alerts pushed to your phone

Weather & Environment

Onboard weather station data and environmental sensors give you a local picture no forecast app can match.

True and apparent wind speed and direction
Barometric pressure with trend indicator
Air temperature, humidity, sea temperature
Bilge water level and pump cycle alerts
Cabin temperature and HVAC status (where fitted)

Universal Compatibility

Works With Every Marine System

NCoDE Mobile is not locked to any single engine manufacturer or electronics brand. It reads standardised marine data protocols, which means it works with the equipment already installed on your yacht.

NMEA 2000

NMEA 0183

J1939 (CANbus)

Modbus TCP/RTU

RTSP / ONVIF (CCTV)

SignalK

Caterpillar, MAN, MTU, Volvo Penta, Cummins, Yanmar, John Deere, Scania — if it speaks a standard protocol, NCoDE reads it. No proprietary gateway. No vendor lock-in. One app for every engine on board.

Role-Based Dashboards

Built for Superyachts

Different people need different views. NCoDE Mobile presents tailored dashboards for every role on board, so everyone sees exactly what they need — nothing more, nothing less.

Captain

Operations overview with navigation, weather, engine summary, and voyage status. One screen to confirm the vessel is ready to depart.

Voyage summary with ETA and fuel burn
Engine status at a glance (all engines)
Weather conditions and barometric trend
Crew and guest safety systems status
Anchor watch with drag alerts

Chief Engineer

Deep technical data for every system in the engine room. Exhaust temperatures, oil analysis trends, generator load balancing, and maintenance schedules.

Per-cylinder exhaust gas temperature
Oil pressure and temperature trends over time
Generator load, frequency, and runtime hours
Bilge pump activation history and alerts
Maintenance due dates and service intervals

Owner

Remote peace of mind. See that your yacht is secure, systems are running, and everything is in order — even when you are thousands of miles away.

Vessel position on a live map
Shore power and battery status
Live CCTV from any camera on board
Security system status and alerts
Monthly fuel and power usage summary

The Hardware Behind the App

Powered by NCoDE Engine

NCoDE Mobile does not connect directly to your yacht's sensors. It connects to a NCoDE Engine — a small, rugged onboard computer that collects data from every system and makes it available securely over your vessel's network or remotely via cellular and satellite.

Recreational & Day Boats

MX10

Compact edge device for yachts up to approximately 30 metres. Connects to NMEA 2000, NMEA 0183, and J1939, including NMEA 2000 digital switching monitoring for CZone and EmpirBus. Powers NCoDE Mobile with real-time engine, navigation, and tank data. Ideal for owner-operated yachts that want professional monitoring without the complexity of a full bridge system.

Superyachts & Commercial

MX100

Full-featured onboard intelligence platform for superyachts, mega yachts, and commercial vessels. Supports every protocol the MX10 does, including NMEA 2000 digital switching monitoring, plus Modbus and RS485. Runs NCoDE Command (the bridge dashboard), NCoDE Mobile, NCoDE Fleet, NCoDE SeaTwin, and NCoDE Compliance. Built for vessels with complex multi-engine, multi-generator setups and crew requirements.

See NCoDE Engine →

Dashboard Layouts

100+

Sensor Types

All

Marine Engines

Real-Time

Updates

Frequently Asked Questions

Yacht Monitoring — FAQ

Common questions about NCoDE Mobile and yacht monitoring capabilities.

What yacht systems can NCoDE Mobile monitor?

Engines from any manufacturer (via NMEA 2000/J1939), fuel and water tanks, house and engine batteries, GPS navigation, compass heading, depth, wind, live CCTV cameras, and environmental data including temperature, humidity, and barometric pressure.

Does NCoDE Mobile work with all marine engines?

Yes. Unlike Mercury VesselView or Suzuki SDSM+, NCoDE Mobile works with any engine that outputs NMEA 2000, NMEA 0183, or J1939 data — Caterpillar, Volvo Penta, MAN, MTU, Yanmar, Cummins, and more. No manufacturer lock-in.

Do I need special hardware for NCoDE Mobile?

NCoDE Mobile requires NCoDE Engine installed on the vessel — either MX10 for recreational and smaller yachts, or MX100 for superyachts and commercial vessels. The Engine connects to your existing marine systems, so no proprietary sensors are needed.

Can I monitor my yacht remotely?

Yes. NCoDE Engine syncs data to the cloud, giving you real-time access from anywhere via the mobile app. Monitor engines, tanks, batteries, cameras, and navigation from your phone whether you are on board or thousands of miles away.

Is NCoDE Mobile available for iPhone and Android?

NCoDE Mobile is available for both iOS and Android devices with optimised interfaces for each platform.

See NCoDE Mobile in Action

NCoDE Mobile is available for iOS and Android. Whether you have a 30-metre motor yacht with twin Caterpillar diesels or a 70-metre superyacht with a full engine room, NCoDE Mobile gives you visibility and control from anywhere in the world. Request a demo or explore the full feature set.

See NCoDE Mobile → Request a Demo

Your Yacht. One App.Every System.